XCT25 Telescopic Truck Crane Operating Weight 33000kg Engine 213Kw Euro III
XCMG 25t Telescope Truck Crane XCT25 Operating Weight 33000kg Engine 213Kw Euro III
XCMG 25t Telescope Truck Crane XCT25 specification
| Item | Unit | Parameter |
| Model | | XCT25L5 |
| Size |
| Overall length | mm | 12870 |
| Overall width | mm | 2550 |
| Overall height | mm | 3470 |
| Wheelbase | mm | 4600+1350 |
| Track | mm | 2074/1834/1834 |
| Weight |
| Operation weight | kg | 33000 |
| Axle load | kg | 7400/12800/12800 |
| Engine |
| Engine model | | SC9DF290.1Q4/SC9DF290.2Q4 |
| Engine rated power | kw/(r/min) | 213/1900 |
| Engine rated torque | N.m/(r/min) | 1400/1400 |
| Driving |
| Top speed | km/h | 90 |
| Minimum stable driving speed | km/h | 2.5～3 |
| Turning |
| Minimum turning diameter | m | 21 |
| Minimum turning diameter of boom | m | 27 |
| Maximum grade | ％ | 45 |
| Minimum ground clearance | mm | 260 |
| Approach angle | ° | 12 |
| Departure angle | ° | 14 |
| Braking distance | m | ≤10(speed 30km/h) |
| Fuel consumption/100km | L | 30 |
| Main performance |
| Maximum rated total lifting capacity | t | 25 |
| Minimum rated amplitude | m | 3 |
| Lifting moment of basic boom | kN·m | 1132 |
| Turntable radius | mm | 3340 |
| Outrigger |
| Vertical | m | 5.65 |
| Horizontal | m | 6.4 |
| Lifting height |
| Basic arm | m | 10.2 |
| Longest main arm | m | 41 |
| Longest main arm + jib | m | 50.2 |
| Longest main arm + jib + extension | m | - |
| Boom length |
| Basic arm | m | 10.8 |
| Longest main arm | m | 42 |
| Longest main arm + jib | m | 51 |
| Longest main arm + jib + extension | m | - |
| Working speed |
| Max.turning speed | r/min | 2.5 |
| Lifting height |
| Main lifting mechanism | | 135 |
| Deputy lifting mechanism | | 135 |
| Boom extension time |
| Full extension | s | 95 |
| Full shrink | | 100 |
Advantages of XCMG 25t Telescope Truck Crane XCT25 specification
Ultra high performance
1. Machine optimization and matching technology
Globally optimized design of the whole machine, comprehensive optimization of the crane boom, turntable and frame, coordinated design of the whole machine and components, making the layout more reasonable, under the condition of the same vehicle weight, the lifting performance is 5 ~ 15% ahead of similar products.
2. The world's first, new single-cylinder latch pin telescopic system
The 50-ton crane's five-section telescopic boom was broken, and the 50-ton product was raised to 6-section boom, with the boom length extended to 50 meters.
3. Original design of large load single wishbone independent suspension system
The left and right wheels move independently and adapt to the ground road conditions. Compared with the conventional integrated axle, the vehicle's handling performance at high-speed corners is increased by 15%. Take the 100-ton all-ground product equipped with this technology as an example. Compared with conventional products, the maximum ground clearance is increased from 300mm to 500mm, and the comprehensive off-road capability of the product is increased by more than 20% compared with conventional products.
4. Newly-developed single-engine power technology for large-tonnage cranes
It breaks through the traditional hydraulic power transmission method and transmits the chassis power to the car through the mechanical transmission shaft. The whole machine uses only one engine system, which optimizes the distribution of the weight of the power on the vehicle. The overall layout is more reasonable. Compared with the conventional dual power system products, the lifting performance is increased by 15%. Only one engine system is required for the chassis. Perform maintenance and save more than 40% of annual maintenance costs.
5. Dual power driving technology
During heavy-load transfer, the loading engine power is introduced into the drop-off to match the special hydraulic reducer independently developed by XCMG. Its output torque is 3 times higher than that of the traditional dual-power method, especially in the heavy-duty product wind power transfer. Under working conditions, the climbing ability is increased from the original 20% to more than 30%, which greatly improves the product's ability to transfer under heavy load.
After-sale service:
1. Assist clients to prepare for the first construction scheme;
2. Install, debug and examine the equipment;
3. Train technical personnel the first-line operators;
4. Provide technical exchanging
5. Offer spare parts at a best price for long term.
6. more than 12 months' warranty period
7. Erection and Commissioning
8. Operator Training
9. Spare Parts Supply
Product Tags:
|
|
XCT25 Telescopic Truck Crane Operating Weight 33000kg Engine 213Kw Euro III Images
|
